MS 461


16 in. Bar

18 in. Bar

20 in. Bar

25 in. Bar

28 in. Bar

32 in. Bar

A well-balanced, professional chainsaw that is fuel efficient and low maintenance.

With the same power and weight as the MS 460, it offers up to 20% less fuel consumption, meaning you can spend less time refueling and less money on fuel. This durable chainsaw also features high torque over a broad RPM range to deliver professional performance. The heavy-duty HD-2 filter element provides longer run times between air filter maintenance. Wrap handle (MS 461 R) and severe cold weath...Read More
Print Spec Sheets
MS 461 Specifications
DISPLACEMENT 76.5 cc (4.7 cu. in.)
ENGINE POWER 4.5 kW (6.0 bhp)
POWERHEAD WEIGHT 6.6 kg (14.6 Ibs.)
FUEL CAPACITY 800 cc (27.1 oz.)
CHAIN OIL CAPACITY 325 cc (11.0 oz.)
OILOMATIC® CHAIN 33 RS3
GUIDE BAR LENGTHS* (Recommended ranges) 40 to 80 cm (16" to 32")
STIHL ROLLOMATIC® E Super
POWER SOURCE Gas
STIHL recommends #3624 (33 RS3 84) OILOMATIC® saw chain and 25" 3003 000 4030 Ematic™ guide bar combination. The actual listed guide bar length can vary from the effective cutting length depending upon which powerhead it is installed.
Model Features
  • Zoom
    STIHL ElastoStart™
    The ElastoStart™ starter handle is an exclusive feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
  • Zoom
    IntelliCarb™ Compensating Carburetor
    The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
  • Zoom
    Side-Access Chain Tensioner
    The side-access chain tensioner makes it much more convenient for the user to adjust the saw chain with a bar wrench as opposed to the typical location of the guide bar adjustment screw.
  • Zoom
    Toolless fuel and oil caps with retainers
    Simply lift the lever and twist the caps to remove or tighten. There‘s no need to use a tool to tighten or loosen.
  • Zoom
    Decompression Valve
    The decompression valve, also referred to as 'deco' or 'deco valve', vents compression in the cylinder for easier starting. The decompression valve temporarily reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope. It is opened manually and closes automatically as soon as the engine fires.
Standard Features
  • Zoom
    Reduced-Emission Engine Technology - Caring for Nature
    The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.

    More Information

  • Zoom
    Common Features for Chainsaws
    View the features common to many STIHL chainsaws.

Important Information
* The actual listed guide bar length can vary from the effective cutting length based on which powerhead it is installed on.
Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty. Learn More…
WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.

STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only.
Click to view the STIHL Limited Warranty Time Periods
We Also Suggest
  • HP Ultra 2-Cycle Engine Oil Zoom
    HP Ultra 2-Cycle Engine Oil
    HP Ultra is a fully synthetic 2-cycle engine oil specially suited for high performance chainsaws and power tools. This oil has outstanding engine cleaning characteristics, plus “ultra” superior lubricating qualities in comparison to other 2-cycle engine oils. It is ideal for use in STIHL 4-MIX® engines. This oil is biodegradable, degrading by 80% in 21 days.

    •2.6 oz. bottle makes 1 gallon mix

    •5.2 oz. bottle makes 2 gallon mix

    •6.4 oz. bottle makes 2 1/2 gallon mix

    •12.8 oz. bottle makes 5 gallon mix

    STIHL recommends a mix of 50:1 high-quality 89 octane or higher unleaded gasoline to STIHL engine oil. This same mix ratio should be used during break-in.

  • Bar and Chain Oil Zoom
    Bar and Chain Oil
    STIHL Bar and Chain oil is formulated to adhere to the bar and chain, and to reduce wear. Special agents in the oil formulation help keep sap and pitch from clinging to the bar and chain.

    Available in quart and gallon bottles, 5 gallon pails and 55 gallon drums, in both summer and winter weights.

  • Complete Filing Kits Zoom
    Complete Filing Kits
    Kits available for the following chain types: STIHL PICCO Mini; 1/4" pitch chain; .325" pitch chain; 3/8" pitch chain; .404" pitch chain.
    Includes file guide, depth gauge, round file, flat file and two file handles in tool pouch.
    Chain Pitch File Diameter File Guide
    Part Number
    Sharpening Kit
    Part Number
    in. mm in. mm Part Number
    3/8 PMN 9.32 5/32 4.0 0811 411 8073

    5605 750 4327

    5605 007 1026

    1/4
    3/8 PM
    6.35
    9.32
    5/32 4.0 0811 411 8091

    5605 750 4327

    5605 007 1027

    0.325 8.25 3/16 4.8 0811 412 8088

    5605 750 4328

    5605 007 1028

    3/8 9.32 13/64 5.2 0814 243 3384 5605 750 4329

    5605 007 1029

    0.404 10.26 7/32 5.5 0811 412 8108 5605 750 4330

    5605 007 1030

For Your Safety
  • Pro Mark™ Chainsaw Boot Zoom
    Pro Mark™ Chainsaw Boot
    Before you head out of the door for your next chainsaw job, lace up the stylish STIHL Pro Mark™ Chainsaw Boot. This boot will help keep your feet protected from the elements with its inner GORE-TEX® fabric, delivering water-resistant technology and optimal breathability. Plus, its deep lacing hooks will help keep your feet securely fastened while you’re hard at work. Complete with a padded steel toe and a comfort sole made of rubber, this high-quality black suede work boot is designed with safety in mind. The hardworking STIHL Pro Mark™ Chainsaw Boot meets OSHA requirements for protective footwear in chainsaw use, as well as EN 17249 (Class 2) and EN 20345 S2 requirements for chainsaw protective boots. Swing by our store and try them on for yourself!
  • Pro Mark™ Forestry Helmet System Zoom
    Pro Mark™ Forestry Helmet System
    The STIHL Pro Mark™ Forestry Helmet System is a premium quality product, designed with NRR 25 hearing protection and adjustable ratchet-style six-point suspension.
  • STIHL Pro Mark™ Dynamic Protective Gloves Zoom
    STIHL Pro Mark™ Dynamic Protective Gloves
    Durable and hardworking, STIHL Pro Mark™ Dynamic Gloves deliver professional-grade hand protection. The palm and inner fingers are made of full grain tanned leather, so you can work with comfort without sacrificing a firm hold. Featuring multiple layers of cut-retardant materials – Avertic® Pro and Dyneema fabrics by Engtex® – these gloves will help deliver protection without compromising the dexterity you need while operating a chainsaw. Accented with an orange rip-stop nylon backing, these dynamic gloves offer style and protection. Water repellant, breathable and featuring a Velcro wrist closure, STIHL Pro Mark™ Dynamic Gloves are as ready for the woods as you.
  • Pro Mark™ Wrap Chaps Zoom
    Pro Mark™ Wrap Chaps
    Same as our apron style chaps with additional lower leg full wrap-around cut-retardant protection. Waist size expands from 30" to 42". Available with 6 or 9 layers in 36" length.

    STIHL Pro Mark items are "Wash and Wear." They do not require dry cleaning as other brands do.

     

     


Are You Ready for a STIHL?

MS 461 is rated 4.9 out of 5 by 100.
Rated 5 out of 5 by from What an incredible piece of equipment I needed a bigger saw than my 024 that my Dad bought new in 1987!!! You will not be disappointed in this unit. Not whatsoever!
Date published: 2017-08-06
Rated 5 out of 5 by from powerful saw Needed bigger saw to cut pine stumps closer to ground in pasture .Stumps range in size from 12 inches to 40 inches.The ms461 with 25 inch bar has done great job more than exceeded my expectations.
Date published: 2017-08-04
Rated 5 out of 5 by from Awesome Saw Bought this because I needed a longer bar for the trees around my house (live in the forest and heat using wood). What an amazing saw. It cuts through these big pines and firs like a hot knife through butter.
Date published: 2017-07-26
Rated 5 out of 5 by from Excellent Saw the 461 is an Excellent saw the power to wait is great with a 25" B and C. I have a MS361 also and wanted a bigger saw t run a 25" + bar and the 461 handles it with no problem. in the future I do plan on putting a maxflow air filter and porting the muffler to get a little more out of it.
Date published: 2017-07-19
Rated 5 out of 5 by from Best Saw I've Used The MS 461 is by far the best saw that I have ever used! It is very easy to start, 1-2 pulls and its running, even when the saw is hot, after refueling. The saw is very powerful, Cherry and Locust are no match for this saw! Also, you get what you pay for
Date published: 2017-07-08
Rated 5 out of 5 by from Awesome saw!!! I cannot say enough good things about this saw! I use it every day for cutting up and felling and milling logs with an Alaskan mill and it never fails to amaze me with the power and reliability of it.
Date published: 2017-06-17
Rated 5 out of 5 by from The MS461 is a good saw. The MS461 is a powerful saw, only thing is it hasn't truly come into the future with the m-tronic saws. I have a 441c-m and a 661c-m and love the pull off the m-tronic in the cut. If you haven't already tried an m-tronic, I highly recommend you do. Don't get me wrong here, the 461 will cut very good, it would just be wayyyyy better with m-tronic and the new antivibe system.
Date published: 2017-05-26
Rated 5 out of 5 by from 461 Arctic 461 ArcticAwesome machine! Very easy to start, even in cold weather. I love the heated handles!!! I wish I did that year's ago!!!!The service after the purchase is excellent. The saw will last me during my time with it, and I will hand it down to my next generation after me. I'm a fourth generation logger in my family. This saw is a fantastic product! Excellently engineered, the BMW of production grade chainsaws!
Date published: 2017-05-18
  • y_2017, m_8, d_14, h_24
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_100
  • loc_en_US, sid_ms461, prod, sort_[SortEntry(order=FEATURED, direction=DESCENDING), SortEntry(order=SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_stihl